Help Clean Up The Enviroment – Use Synthetic Oils And Lubricants

The Green Movement is a most positive attempt to improve, restore, and preserve the earth’s natural environment in a diverse number of ways.

Modern living has diminished the quality and cleanliness of the earth’s environment, decreasing its excellence.

As an example, the ConocoPhillips facility in Linden, New Jersey sends 390 tons of toxic chemicals into the air each year.

It was once assumed that airborne chemicals would not cause any problems, just simply blow away and go to some place else, but now we know that’s not correct.

Chemical particulate matter returns to us as acid rain and polluted air, negatively impacting wildlife, rivers, streams, exterior car surfaces, and buildings–to name a few things.

Pollution has become a global problem because air currents are not limited by national boundaries. Rapidly growing manufacturing in China and India has increased air pollution worldwide.

With nuclear plant technology improving tremendously, it is now possible to build far safer nuclear plants, fueled by uranium. Hundreds of them are needed worldwide, and many are being built now.

The USA needs many more nuclear plants, as they reduce overall petroleum usage and can give us cleaner air.

Windmills, once a joke, likewise have improved–thanks to technology. These can produce lots of electric power without burning fuels.

Solar panels, once mundane–if not ugly–have been improved, too. They, too, have become useful producers of energy for homes and commercial buildings, and they are very fashionable in appearance.

Over the long term, air pollution and acid rain should be lessened–if we continue to

implement new Green Movement possibilities.

Widespread use of synthetic oils and lubricants can help to improve the environment, too.

Synthetic oils were used in jet engines first. Synthetics for ground use (cars, trucks,

boats, etc.) were created and introduced in the early 1970’s by Albert J. Amatuzio, Founder, President & Chief Executive Officer of AMSOIL INC.

Unlike conventional oils derived from refining crude oil, synthetic oils are made

with chemicals. Petroleum products break down under heat and pressure, causing

sludge. But synthetics do not.

Now, almost 35 years later AMSOIL has an expansive, excellent line of synthetic

oils and lubricants for cars, trucks, boats, powersports equipment, and commercial

and industrial uses. AMSOIL now offers nanotechnology oil and air filters, too.

How can AMSOIL products help to improve the environment?

1. AMSOIL oils have extended drain intervals, needing replacement every 25,000 miles or one year, whichever comes first. Conventional petroleum oils need to be changed within 3,000 to 5,000 miles. This saves the buyer time and money.

2. Because AMSOIL oils last so long, less used oil is dumped into the earth.

3. AMSOIL’s nanotechnology EA air and oil filters help to trap much more particulate matter, helping to keep the air and oil cleaner. Exhaust emissions are lessened significantly.

4. New AMSOIL diesel oils help to meet no-nonsense 2007 EPA mandated emissions standards for diesel engines.

Not only regulatory agencies are cracking down on air pollution, but so, too, are the courts.

A federal judge in Vermont ruled against the U.S. automakers and upheld a state law that regulates greenhouse gas emissions from vehicles.

The regulations — adopted by California and 14 other states– would require a 30 percent reduction in carbon dioxide emissions from cars and trucks by 2016.

Don’t rely 100% on regulatory agencies, legislatures and courts to clean up the environment.

Think and act as a responsible citizen by supporting The Green Movement.

By using more nuclear plants, windmills, solar panels as well as synthetic oils and lubricants, we can help return the earth to its pristine beauty.